Product Overview
A2RA-7710 SUNTEC FUEL PUMP (WASTE OIL)
The fuel pump moves the fuel oil from the fuel tank to the fuel nozzle. It is driven by the burner motor. The pump uses a meshed gearset to squeeze fuel through the pump at about 100 to 200 PSI. Pump pressure is read at the gauge port and adjusted with the pressure adjusting screw.
Most fuel pump problems are due to either imporper installation or clogging with debris. Guaranteeing a clean, water free, fuel supply will do more than anything to prolong fuel pump life. Constant readjustment of pressure or other settings on the fuel pump will result in inreliable fuel pump action.
IMPORTANT: The fuel pump is lubricated by fuel oil. running the pump dry or with water in the fuel will cause pump failure.
SPECIFICATIONS:
- Model A Single Stage Pump
- Waste Oil Aplication
- Mount in any direction.
- Shaft Rotation: RH-RH
- RPM: 3450/100
- Nozzle Capacity: 2.5/.4 GPH
- Rated Pressure: 100 PSI
- Weight: 3.6 LBS.