Questions? Feedback? powered by Olark live chat software

FOAMiT DS4V-3, DOORWAY FOAM UNIT-CONCENTRATE -VITON-INCLUDES 3 GK7T

FoamIt

(No reviews yet) Write a Review
$3,134.99
SKU:
DS4V-3
UPC:
DS4V-3
Weight:
30.00 LBS
Adding to cart… The item has been added

Product Overview

FOAM-iT product.
  • Draws from concentrated product
  • Dilutes product at ratios of 38:1 to 183:1 (water:chemical)
  • Repeat cycle timer
  • Quick-change pump
  • Supports up to 3 twin-line stainless steel nozzle assemblies
  • Up to 100 ft (30.5 m) total distance between control box and nozzle(s) (distance does not need to be evenly distributed)
COMPRESSED AIR REQUIREMENTS 40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
WATER REQUIREMENTS 10-100 psi (0.7-6.9 bar)
Backflow prevention is required – consult local plumbing ordinances for more information.
LIQUID TEMPERATURE RANGE 40-100ËšF (4.4-37ËšC)
ELECTRICAL REQUIREMENTS 120 VAC at 60 Hz, 2 amps (GFCI protected outlet)
OPERATING VOLTAGE 120 VAC
CHEMICAL COMPATIBILITY Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or MSDS for your product or contact our customer service department.
POWER TYPE Compressed air, electricity
CHEMICAL PICKUP TYPE Draws from concentrated product
DILUTION RATIO RANGE (WATER:CHEMICAL)* 38:1 to 183:1
NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) One product
SUCTION LINE LENGTH/DIAMETER 8 ft. (2.4 m) clear hose with 1/4 in. (6.4 mm) inside diameter
FLOW RATE* 2 gal/min (7.6 l/min)
PUMP SEALS Santoprene, Viton, or Kalrez
TIMER OPERATION TYPE Repeat cycle
COVERAGE AREA One nozzle: up to 9x5 ft. (2.7x1.5 m);
Two nozzles: up to 8x4 ft. (2.4x1.2 m) at each nozzle;
Three nozzles: up to 6x3 ft. (1.8x0.9 m) at each nozzle
FAN TIP One nozzle: ST80200;
Two nozzles: ST80100;
Three nozzles: ST8060-1/2
NOZZLE TYPE Twin-line stainless steel nozzle assembly (GK7T)
NUMBER OF NOZZLES One control box can support up to three nozzle assemblies
DISTANCE FROM NOZZLES TO CONTROL BOX The combined distance between the control box and the nozzle(s) must equal 100 ft. (30.5 m) or less
TUBING/FITTING SIZES Designed for use with 1/2 in. (12.7 mm) outside diameter tubing between control box and nozzle(s)

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

Reviews

(No reviews yet) Write a Review