Product Overview
P.M.R. 2SFX30ES3 3.0GPM 1500PSI 3450RPM 190F HI TEMP PUMP 5/8" ELEC. SHAFT
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
We have added some features to the standard 2SFX. these include an inlet fitting, and pressure relief valve.
PUMP FEATURES:
- UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life
- Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities.
- Ultimate portability, less than 11 pounds, less than 10" long.
- Regulating unloader is standard on each pump to assure system pressure control and pump protection
SPECIFICATIONS:
- Plunger Pump
- Direct Drive
- Maximum Volume: 3.0 GPM
- Maximum Discharge Pressure: 1500 PSI
- Maximum Inlet Pressure: 75 PSI
- Maximum Pump Speed: 3450 RPM
- Minimum Horsepower Requirements: 3.0 bhp
- Bore: .708" (18mm)
- Stroke: .177" (4.5mm)
- Crankcase Capacity: 11.83 oz. use CAT Pump hydraulic oil
- Maximum Fluid Temperature: 160 Degrees F.
- Inlet Port: 3/8" FPT
- Discharge Ports: Dual 3/8" FPT
- By-pass Port: 1/4" FPT
- Dimensions: 9.13" x 6.65" x 6.50"
- Weight: 11.83 lbs
Lubrication: fill crankcase with CAT Pump hydraulic oil per pump specifications. DO NOT RUN PUMP WITHOUT OIL IN CRANKCASE. Change initial oil after a 50 hour break-in period, and every three months or 500 hour intervals thereafter.