Questions? Feedback? powered by Olark live chat software

FOAMiT - WALL MOUNTED SPRAY UNIT-CONCENTRATE-SANTO

FoamIt

(No reviews yet) Write a Review
$1,372.74
SKU:
SP-WC
Weight:
40.00 LBS
Adding to cart… The item has been added

Product Overview

SPRAY-iT product.
  • Draws from concentrated product
  • Dilutes product at ratios of 34:1 to 640:1 or 24:1 to 640:1, depending on fan tip used
  • Powered by compressed air
  • Quick-change pump
  • Poly spray gun wand with fan tip
  • Anti-kink hose protection
COMPRESSED AIR REQUIREMENTS 40-80 psi (3-5 bar) with 2 cfm (28.3 l/min)
WATER REQUIREMENTS 10-100 psi (0.69-6.9 bar) 
Backflow prevention is required – consult local plumbing ordinances for more information
LIQUID TEMPERATURE RANGE 40-100ËšF (4.4-37ËšC)
CHEMICAL COMPATIBILITY Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or MSDS for your product or contact our customer service department.
POWER TYPE Compressed air
CHEMICAL PICKUP TYPE Draws from concentrated product
DILUTION RATIO RANGE (WATER:CHEMICAL)* 34:1 to 640:1 with ST2520 fan tip;
24:1 to 640:1 with ST2550 fan tip
NUMBER OF PRODUCTS UNIT CAN DRAW FROM One product
SUCTION LINE LENGTH/DIAMETER 8 ft. (2.4 m) clear hose with 1/4 in. (6.4 mm) inside diameter
   
DISCHARGE WAND/TIP TYPE Polypropylene trigger handle with 25Ëš fan tip
OUTPUT DISTANCE 10-12 ft. (3.0-3.7 m)
OUTPUT VOLUME 2 gal/min (7.6 l/min) of liquid with ST2520 fan tip; 
4-5 gal/min (15.1-18.9 gal/min) of liquid with ST2550 fan tip
FLOW RATE* 2 gal/min (7.6 l/min) with ST2520 fan tip; 4-5 gal/min (15.1-18.9 l/min) with ST2550 fan tip
PUMP SEALS Santoprene, Viton, or Kalrez

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

Reviews

(No reviews yet) Write a Review