Product Overview
A 
product.
product.- Draws from concentrated Sterilex products and dilutes on the fly to prevent waste
- No need to pre-mix solution – only activate what you use, as you use it
- Pre-set to dilute Sterilex products at labeled rate of 1:1:10 to 1:1:8 – no setup required
- Includes two 5 gallon chemical jugs with quick-connect suction fittings
- Save time with fewer chemical refills – two 5 gallon jugs of concentrate will make 45-50 gallons (170-189 liters) of solution. Just refill the water tank and keep foaming
- User-friendly color coding on jugs and unit corresponds to Sterilex solution 1 and 2
- Foam wand with fan tip for efficient surface coverage – ideal for environmental cleaning and disinfecting food contact surfaces
- Quick connect wand can be easily interchanged with optional FOAM-iT attachments for drain foaming >>
- Onboard water tank – 15 gallon (56.8 liter) capacity
- Powered by compressed air
- Viton pump seals for compatibility with Sterilex
- Hinged back plate provides tool-free access to components
- Quick-change pump
- Hinged lid, available in 5 colors
- Anti-kink hose protection
- Translucent tank and jugs allow visibility of fill levels
- Integrated hose wraps
- Front-facing drain
- In-line strainer to protect pump from debris
| COMPRESSED AIR REQUIREMENTS | 40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min) |
|---|---|
| LIQUID TEMPERATURE RANGE | 40-100ËšF (4.4-37ËšC) |
| CHEMICAL COMPATIBILITY | This unit is specifically configured for use with Sterilex liquid products. |
| POWER TYPE | Compressed air |
|---|---|
| CHEMICAL PICKUP TYPE | Draws from concentrated product |
| DILUTION RATIO RANGE (CHEMICAL A : CHEMICAL B : WATER)* | 12.8-16 fl. oz. : 12.8-16 fl. oz. : 1 gallon (378.5-473.2 ml : 378.5-473.2 ml : 3.78 liters) |
| NUMBER OF PRODUCTS UNIT CAN DRAW FROM | Two products, simultaneously |
| SUCTION LINE LENGTH/DIAMETER | 3/8 in. (9.5 mm) inside diameter (water suction) |
| CAPACITY | 15 gallons (56.78 liters) of water; Up to 10 gallons (37.85 liters) of concentrate |
| DISCHARGE LINE LENGTH/DIAMETER | 30 ft. (9 m) hose, with 3/4 in. (19 mm) inside diameter |
| DISCHARGE WAND/TIP TYPE | 12 in. (30.48 cm) stainless steel wand and ball valve with 65Ëš fan tip; includes stainless quick connects |
| OUTPUT DISTANCE | 10-12 ft. (3-4.6 m) |
| OUTPUT VOLUME | 15-20 gal/min (56.8-75.7 l/min) |
| FLOW RATE* | 2 gal/min (7.6 l/min) |
| PUMP SEALS | Viton |
| WHEEL TYPE | Two 10 inch non-marking wheels, two 5 inch casters with lock |
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
