Loading... Please wait...

Categories

Our Newsletter


FOAMit - Twin-Line Pre-Mix Doorway Foam Unit-SANTO-INCLUDES GK7T

  • Image 1
Price:
$1,634.64
SKU:
DS5
Brand:
Weight:
30.00 LBS


Product Description

FOAM-iT product.
  • Draws from pre-mixed solution
  • Powered by compressed air and electricity
  • Repeat cycle timer
  • Quick-change pump
  • Supports up to 3 twin-line stainless steel nozzle assemblies
  • Up to 100 ft. (30.5 m) total distance between control box and nozzle(s) (distance does not need to be evenly distributed)
COMPRESSED AIR REQUIREMENTS 40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
WATER REQUIREMENTS 10-100 psi (0.69-6.9 bar)
Backflow prevention is required – consult local plumbing ordinances for more information.
LIQUID TEMPERATURE RANGE 40-100˚F (4.4-37˚C)
ELECTRICAL REQUIREMENTS 120 VAC at 60 Hz, 2 amps (GFCI protected outlet)
OPERATING VOLTAGE 120 VAC
CHEMICAL COMPATIBILITY Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

POWER TYPE Compressed air, electricity
CHEMICAL PICKUP TYPE Draws from pre-mixed solution
NUMBER OF PRODUCTS UNIT CAN DRAW FROM One product
SUCTION LINE LENGTH/DIAMETER 8 ft. (2.4 m) hose with 3/8 in. (9.5 mm) inside diameter
FLOW RATE* 2 gal/min (7.6 l/min)
PUMP SEALS Santoprene, Viton, or Kalrez
TIMER OPERATION TYPE Repeat cycle
COVERAGE AREA One nozzle: up to 9x5 ft. (2.7x1.5 m);
Two nozzles: up to 8x4 ft. (2.4x1.2 m) at each nozzle;
Three nozzles: up to 6x3 ft. (1.8x0.9 m) at each nozzle
FAN TIP One nozzle: ST80200;
Two nozzles: ST80100;
Three nozzles: ST8060-1/2
NOZZLE TYPE Twin-line stainless steel assembly (GK7T)
NUMBER OF NOZZLES One control box can support up to three nozzle assemblies
DISTANCE FROM NOZZLES TO CONTROL BOX The combined distance between the control box and the nozzle(s) must equal 100 ft. (30.5 m) or less
TUBING/FITTING SIZES Designed for use with 1/2 in. (12.7 mm) outside diameter tubing between control box and nozzle(s)

 

 

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the FOAMit - Twin-Line Pre-Mix Doorway Foam Unit-SANTO-INCLUDES GK7T to your wish list.

You Recently Viewed...