Product Overview
A 
product.
product.- Draws from pre-mixed solution
- Battery operated
- Up to 45 minutes of continuous use from one charge
- Stainless ball valve with foam fan tip
- Hinged back plate provides tool-free access to components
- Natural color tank for easy visibility of product levels
- Hinged lid, available in 5 colors
- Integrated hose wraps
- Front-facing drain
| LIQUID TEMPERATURE RANGE | 40-100ËšF (4.4-37ËšC) |
|---|---|
| ELECTRICAL REQUIREMENTS | 120 VAC at 60 Hz, 1 amp (GFCI protected outlet) for battery charger only |
| OPERATING VOLTAGE | 12 VDC |
| CHEMICAL COMPATIBILITY | Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or MSDS for your product or contact our customer service department. |
| POWER TYPE | Battery |
|---|---|
| BATTERY CHARGE TIME (FROM FULL DEPLETION) | 8 hours |
| BATTERY RUN TIME (FROM FULL CHARGE) | 45 minutes of continuous use |
| CHEMICAL PICKUP TYPE | Draws from pre-mixed solution |
| NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) | One product |
| SUCTION LINE LENGTH/DIAMETER | 3/8 in. (9.5 mm) inside diameter |
| CAPACITY | 12.5 gallons (47.32 liters) |
| DISCHARGE HOSE DIAMETER/LENGTH | 12 ft. (3.66 m) hose, with 3/8 in. (9.5 mm) inside diameter |
| DISCHARGE WAND/TIP TYPE | Polypropylene trigger handle with 50Ëš fan tip |
| OUTPUT DISTANCE | 5-6 ft. (1.52-1.83 m) |
| OUTPUT VOLUME | 4-5 gal/min (15-18.93 l/min) of foam |
| FLOW RATE* | 2 gal/min (7.6 l/min) |
| PUMP SEALS | Santoprene, Viton, or Kalrez |
| WHEEL TYPE | Two 10 inch non-marking wheels |
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
