Questions? Feedback? powered by Olark live chat software

FOAMit DS3K-CB, DOORWAY FOAM UNIT- CONCENTRATE - KALREZ (Control Box Only)

FoamIt

(No reviews yet) Write a Review
$2,114.26
SKU:
DS3K-CB
Weight:
20.00 LBS
Adding to cart… The item has been added

Product Overview

(CONTROL BOX ONLY)
 
FOAM-iT product.
  • Draws from concentrated product
  • Dilutes product at ratios of 38:1 to 183:1 (water:chemical)
  • Repeat cycle timer
  • Quick-change pump
  • Supports up to 2 nozzle assemblies
  • Up to 25 ft (7.6 m) total distance between control box and nozzle(s)
COMPRESSED AIR REQUIREMENTS 40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
WATER REQUIREMENTS 10-100 psi (0.7-6.9 bar)
Backflow prevention is required – consult local plumbing ordinances for more information.
LIQUID TEMPERATURE RANGE 40-100ËšF (4.4-37ËšC)
ELECTRICAL REQUIREMENTS 120 VAC at 60 Hz, 2 amps (GFCI protected outlet)
OPERATING VOLTAGE 120 VAC
CHEMICAL COMPATIBILITY Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or MSDS for your product or contact our customer service department.
POWER TYPE Compressed air, electricity
CHEMICAL PICKUP TYPE Draws from concentrated product
DILUTION RATIO RANGE (WATER:CHEMICAL)* 38:1 to 183:1
NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) One product
SUCTION LINE LENGTH/DIAMETER 8 ft. (2.4 m) clear hose with 1/4 in. (6.4 mm) inside diameter
FLOW RATE* 2 gal/min (7.6 l/min)
PUMP SEALS Santoprene, Viton, or Kalrez
TIMER OPERATION TYPE Repeat cycle
COVERAGE AREA One nozzle: up to 9x4 ft. (2.7x1.5 m);
Two nozzles: up to 5x3 ft. (2.4x1.2 m) at each nozzle
FAN TIP ST8070
NOZZLE TYPE Single-line nozzle assembly (GK6T)
NUMBER OF NOZZLES One control box can support up to two nozzle assemblies
DISTANCE FROM NOZZLES TO CONTROL BOX The combined distance between the control box and the nozzle(s) must equal 25 ft. (7.6 m) or less
TUBING/FITTING SIZES Designed for use with 1/2 in. (12.7 mm) outside diameter tubing between control box and nozzle(s)

 

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

Reviews

(No reviews yet) Write a Review