Questions? Feedback? powered by Olark live chat software

FOAMiT - WALL MOUNTED FOAM UNIT-PREMIX-ALL POLY FITTINGS- VITON (CONTROL BOX ONLY)

FoamIt

(No reviews yet) Write a Review
$931.87
SKU:
FI-WALL-APV-CB
Weight:
10.00 LBS
Adding to cart… The item has been added

Product Overview

(CONTROL BOX ONLY)
 
FOAM-iT product.
  • Draws from pre-mixed solution
  • Powered by compressed air
  • Stainless steel ball valve and wand
  • Stainless steel fluid fittings
  • Quick-change pump
COMPRESSED AIR REQUIREMENTS 40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
LIQUID TEMPERATURE RANGE 40-100ËšF (4.4-37ËšC)
CHEMICAL COMPATIBILITY Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or MSDS for your product or contact our customer service department.

 

POWER TYPE Compressed air
CHEMICAL PICKUP TYPE Draws from pre-mixed solution
NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) One product
SUCTION LINE LENGTH/DIAMETER 8 ft. (2.4 m) hose with 3/8 in. (9.5 mm) inside diameter)
DISCHARGE HOSE DIAMETER/LENGTH 50 ft. (15 m) hose, with 3/4 in. (19 mm) inside diameter)
DISCHARGE WAND/TIP TYPE 7 in. (17.8 cm) stainless steel wand with zero tip and ball valve
OUTPUT DISTANCE 25-30 ft. (7-9 m)
OUTPUT VOLUME 20-45 gal/min (75-170 l/min) of foam
FLOW RATE* 2 gal/min (7.6 l/min)
PUMP SEALS Santoprene, Viton, or Kalrez

 

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

Reviews

(No reviews yet) Write a Review