Product Overview
SLPTP2530-945 Assy, Pump w/Plumbing, TP2530
GENERAL PUMP
PSI : 2500
GPM : 3.0
The pump on the photo is not the exact pump.
Gen. Pump Assy. w/Unloader & Plumbing. 3 GPM @ 2500 PSI,
Ideal for 5.5 & 6.5 HP Engines. With YVB135KDM Unloader
QUICK AND EASY INSTALL
This pump is an easy replacement, no plumbing required. You will only need to remove your broken pump and bolt this new pump on to the engine, and your done!
Pumps that are not market as SLP before their model number are not completely plumbed. If you buy a bare pump you will need to buy the unloader kits and other required parts.
PSI : 2500
GPM : 3.0
The pump on the photo is not the exact pump.
Gen. Pump Assy. w/Unloader & Plumbing. 3 GPM @ 2500 PSI,
Ideal for 5.5 & 6.5 HP Engines. With YVB135KDM Unloader
QUICK AND EASY INSTALL
This pump is an easy replacement, no plumbing required. You will only need to remove your broken pump and bolt this new pump on to the engine, and your done!
Pumps that are not market as SLP before their model number are not completely plumbed. If you buy a bare pump you will need to buy the unloader kits and other required parts.
Boasting new, oversized connecting rods for ultimate crankcase performance and a forged brass manifold with an exclusive lifetime warranty, this TP2530 Hollow Shaft Pressure Washer Pump is flanged for direct coupling to a gasoline powered engine.
This Specially Priced Value Kit also includes:
- YVB75KDMN Unloader
- YVB Plumbing
- Pressure Relief Valve
- Pressure Washer Hose Plug
- Garden Hose Inlet with Filter
Features include:
- Forged brass manifold with exclusive lifetime warranty
- New, over-sized connecting rods for ultimate crankcase performance
- Die cast, anodized aluminum, oil-bath crankcase
- Solid ceramic plungers with continuously lubricated packings
- Maximum Volume: 3.0 GPM
- Maximum Discharge Pressure: 2500 PSI
- Maximum Pump Speed: 3400 RPM
- Maximum Inlet Pressure: 125 PSI
- Maximum Inlet Vacuum: 3 ft. water (2.6 in. Hg)
- Bore: .591 in. / 15 mm
- Stroke: .283 / 7.2 mm
- Crankcase Oil Capacity: 11.0 oz.
- Maximum Fluid Temperature: 165 F
- Inlet Port Thread: 3/8-19 BSPP-F
- Unloader Inlet Port Thread: 1/2-14 BSPP-F (DO NOT use NPT Inlet Fitting)
- Discharge Port Thread: 1/4-19 BSPP-F
- Unloader Discharge Port Thread: 3/8-19 BSPP-M
- Hollow Shaft I.D.: 3/4 in. / 19 mm
- Weight: 11.4 lbs.
- Dimensions: 7.0" x 7.2" x 5.5"
