P217RX 3.3GPM 2000PSI 3450RPM 24MM SHAFT

SPECIFICATIONS:

• Maximum Flow: 1.8 GPM @ 1750 RPM 3.3 GPM @ 3450 RPM
• Maximum Pressure: 2000 PSI
• Maximum Pump Speed: 3450 RPM
• Minimum Horsepower Requirements: 5.8 bhp (8.7 hp for gas engines)
• Shaft Diameter: 24mm
• Plunger Diameter: 18mm
• Stroke: 5.5mm
• Maximum Temperature: 160 Degrees F.
• Fluid End: Brass
• Gear End: Aluminum
• Valves: Stainless Steel
• Inlet Ports: Dual 1/2" BSP
• Discharge Ports: Dual 3/8" BSP
• Weight: 11 lb. 11 oz.

Lubrication: Prior to initial operration, add oil to crankcase so that oil level is between the two lines on the dipstick. DO NOT OVERFILL. Crankcase oil should be changed after the first 50 hours of operation, then at regular intervals of 500 hours or less depending on operating conditions.