P318R 5.5GPM 2000PSI 1450RPM 24mm SHAFT

SPECIFICATIONS:

• Maximum Flow: 4.1 GPM
• Maximum Pressure: 2200 PSI
• Maximum Pump Speed: 3450 RPM
• Minimum Horsepower Requirements: 6.0 bhp (7.8 hp for gas engines)
• Shaft Diameter: 24mm
• Plunger Diameter: 20mm
• Stroke: 16mm
• Inlet Ports: Dual 1/2" BSP
• Discharge Ports: Dual 3/8" BSP
• Weight: 16 lbs.

Lubrication: Prior to initial operation, add oiil to the crankcase so that the oil level is between the two lines on the oil dipstick. DO NOT OVERFILL. Crankcase oil should be changed after the first 50 hours of operation, then at regular intervals of 500 hours or less depending on operating conditions.