Questions? Feedback? powered by Olark live chat software

280 PUMP 3.0GPM 1000PSI 133ORPM 16.5mm

CAT

(No reviews yet) Write a Review
MSRP: $1,250.18
$1,000.14
(You save $250.04 )
SKU:
4467
Weight:
0.00 LBS
Adding to cart… The item has been added

Product Overview

280 PUMP 3.0GPM 1000PSI 133ORPM 16.5mm

FEATURES:

Superior Design

  • Triplex uniflo design provides continuous forward fluid flow for smooth operation
  • Wetted cups and floating pistons are lubricated and cooled by pumped fluid for long cup life
  • Mechanically actuated inlet valves give strong lift and easy prime
  • All stainless steel discharge valves are a spherical design for quieter operation
  • Oil bath crankcase assures optimum lubrication
  • Lubricated inlet seals prevent leakage and prolong life

Quality Materials:

  • Cylinder and sleeve wear surfaces are hard chrome plated 304 stainless steel for maximum durability and abrasion resistance
  • Chrome plated, brass manifolds and optional stainless steel manifolds are strong and corrosion resistant
  • Heavy Duty connecting rods are made of high quality Zamak offering superior bearing quality strength
  • Chrome moly crankshaft gives unmatched strength and surface hardness
  • Oversized crankshaft bearings with greater loading capacity mean longer bearing life

Easy Maintenance:

  • Stepped stainless steel piston rod and slinger with chrome plated 304 stainless steel sleeve allows easy replacement from front of pump
  • All wet end wear surfaces are easily serviced without entering crankcase, requiring less time and effort
  • Wear parts are in handy kits
  • Routine lubrication checks are the only maintenance required on this precision built pump
SPECIFICATIONS:
  • Triplex Piston Pump
  • Solid Shaft
  • Maximum Volume: 3 GPM
  • Discharge Pressure: 100 to 1000 PSI
  • Maximum Inlet Pressure: 40 PSI
  • Maximum Pump Speed: 1330 RPM
  • Minimum Horsepower Required: 2 bhp (3.0 hp for gas engines)
  • Bore: .787" (20mm)
  • Stroke: .394" (10mm)
  • Crankcase Capacity: 10 oz. use CAT pump hydraulic oil
  • Inlet Port: 1/2" FPT
  • Chemical Injection Port: 1/4" FPT
  • Discharge Ports: Dual 3/8" FPT
  • Pulley Mounting: Either side
  • Shaft Diameter: .650" (16.5mm)
  • Dimensions: 10.77" x 9.06" x 5.14"
  • Weight: 11.7 lbs.

Lubrication: fill crankcase with CAT pump hydraulic oil per pump specifications. DO NOT RUN PUMP WITHOUT OIL IN CRANKCASE. Change initial oil after 50 hour break-in period and every three months or 500 hour intervals thereafter.

**Brackets NOT included**

Reviews

(No reviews yet) Write a Review