SPECIFICATIONS:
- Plunger Pump
- Direct Drive with Electric Flange
- Maximum Volume: 2.0 GPM
- Maximum Discharge Pressure: 1500 PSI
- Maximum Inlet Pressure: 75 PSI
- Maximum Pump Speed: 3450 RPM
- Minimum Horsepower Requirements: 2.0 bhp
- Bore: .708" (18mm)
- Stroke: .122" (3.1mm)
- Crankcase Capacity: 11.83 oz. use CAT Pump hydraulic oil
- Maximum Fluid Temperature: 160 Degrees F.
- Inlet Port: 3/8" FPT
- Discharge Ports: Dual 3/8" FPT
- By-pass Port: 1/4" FPT
- Dimensions: 9.13" x 6.65" x 6.50"
- Weight: 11.83 lbs.
Lubrication: fill crankcase with CAT Pump hydraulic oil per pump specifications. DO NOT RUN PUMP WITHOUT OIL IN CRANKCASE. Change initial oil after 50 hour break-in period, and every three months or 500 hour intervals thereafter.
|
