Product Overview
350 5PFR CERAMIC PLUNGER, 5.0/1500, 1725RPM
FEATURES:
Superior Design:
- Triplex plunger design gives smoother fluid flow
- High pressure seals are completely lubricated and cooled by the fluid being pumped
- Inlet and discharge valve assemblies interchange for easier maintenance
- Lubricated low pressure seal provides double protection against external leakage
- Oil bath crankcase assures optimum lubrication
- Close tolerance concentricity of the ceramic plunger maximizes seal life
Quality Materials:
- All stainless steel valves are heat treated and seats are roller burnished for a positive seal and extended valve life
- Brass, stainless steel, or nickel aluminum brass manifolds for strength and corrosion resistance
- Special hardened, polished surface of solid ceramic plunger is abrasion resistant and results in extended seal life
- Specially formulated CAT PUMP exclusive, HI-Pressure seals offer unmatched performance and seal life
- Diecast aluminum crankcase provides high strength, minimum weight and precision tolerance control
- Chrome-moly crankshaft gives unmatched strength and surface hardness
- Oversized crankshaft bearings with greater loading capacity mean longer bearing life
Easy Maintenance:
- Wet end is easily serviced without entering crankcase, requiring less time and effort
- Valve assemblies are accessible without disturbing piping, for quick service
- Preset packings mean no packing gland adjustment is necessary, reducing maintenance costs
SPECIFICATIONS:
- Triplex Plunger Pump
- Solid Shaft
- Maximum Volume: 5.0 GPM
- Maximum Discharge Pressure: 1500 PSI
- Maximum Inlet Pressure: 60 PSI
- Maximum Pump Speed: 1725 RPM
- Minimum Horsepower Requirements: 6.0 bhp (9.0 hp for gas engines)
- Bore: .787" (20mm)
- Stroke: .709" (18mm)
- Crankcase Capacity: 18 oz. use CAT Pump hydraulic oil
- Maximum Fluid Temperature: 160 Degrees F.
- Inlet Ports: Dual 1/2" FPT
- Discharge Ports: Dual 3/8" FPT
- Shaft Diameter: .787" (20mm)
- Dimensions: 11.5" x 10.0" x 5.28"
- Weight: 19.8 lbs.
Lubrication: fill crankcase with CAT Pump hydraulic oil per pump specifications. DO NOT RUN PUMP WITHOUT OIL IN CRANKCASE. Change initial oil after a 50 hour break-in period, and every three months or 500 hour intervals thereafter.