SPECIFICATIONS:
- Carbide tip.
- Maximum Flow: 8 GPM
- Maximum Pressure: 3650 PSI
- Maximum Temperature: 190 degrees F.
- 24" wand
- 25 feet of polybraid hose
INSTALLATION:
- (1). Install male pipe thread into the outlet of trigger gun. If using teflon tape as a sealant, make sure to get no tape inside the pipe, as it may clog the high pressure water nozzle
- (2). Insert the probe into bag, bucket, or pile of sand. MAKE CERTAIN THE OPPOSITE END OF THE SHORTER TUBE IS NOT COVERED BY SAND. This is a breather tube and performance will be affected dramatically if this tube is obstructed
- (3). Turn adjustment knob fully clockwise for maximum sand flow
|