Product Overview
FOAM-iT - 2.6 Gallon Foam Unit (10 Liter, Dual Operation)
NEW!
A Pump up you DONT need to PUMP UP!!!
Pressurize the tank with an air compressor, then unplug and foam anywhere.
Our NEW 2.6 Gallon dual-power foam unit provides high-quality foam with less labor. Get all the flexibility of a pump up unit, plus the ability to use compressed air or the manual pump.
Features
- Dual operation with manual pump and connection for air supply for flexibility in applications
- Connect to an air source to pressurize the unit, then disconnect and move the unit to the area to be cleaned
- Produces thick, high quality foam
- Lightweight, durable, and chemical-resistant discharge hose
- Pressure regulator and pressure relief valve for safety
- Viton seals for chemical compatibility
- Natural color tank for easy visibility of product levels
Requirements
| COMPRESSED AIR REQUIREMENTS | 40 psi (3 bar) with 2-5 cfm (57-142 l/min) |
| LIQUID TEMPERATURE RANGE | 40-100ËšF (4.4-37ËšC) |
Specifications
| POWER TYPE | Compressed air or manual |
|---|---|
| CHEMICAL PICKUP TYPE | Draws from pre-mixed solution |
| NUMBER OF PRODUCTS UNIT CAN DRAW FROM | One product |
| CAPACITY | 2.6 gallons (10 liters) |
| DISCHARGE LINE LENGTH/DIAMETER | 6 ft. (1.8 m) hose, with 1/4 in. (6.4 mm) inside diameter |
| DISCHARGE WAND/TIP TYPE | Polypropylene trigger handle with 65Ëš fan tip |
| OUTPUT DISTANCE | 5-6 ft. (1.5-1.8 m) |
| OUTPUT VOLUME | 3 gal/min (11.4 l/min) |
| FLOW RATE | 2 gal/min (7.6 l/min) |
| PUMP SEALS | Viton |
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
