FOAM-iT F100-DF, 2.6 Gal Dual-Power Foam Unit w/ Drain Foam Attachment

• Foam travels through drains, providing 360° contact along pipe walls for maximum sanitation. Learn more about drain foaming.
• 18 in. (45.7 cm) polypropylene wand with 5 in. (12.7 cm) diameter plunger
• Dual operation with manual pump and connection for air supply for flexibility in applications
• Connect to an air source to pressurize the unit, then disconnect and move the unit to the area to be cleaned
• Lightweight, durable, and chemical-resistant discharge hose
• Pressure regulator and pressure relief valve for safety
• Viton seals for chemical compatibility
• Natural color tank for easy visibility of product levels

Specs:

• power type - Compressed air or manual
• chemical pickup type - Draws from pre-mixed solution
• number of products unit can draw fro - One product
• capacity - 2.6 gallons (10 liters)
• discharge line length/diameter - 6 ft. (1.8 m) hose, with 1/4 in. (6.4 mm) inside diameter
• discharge wand/tip type - Polypropylene trigger handle with 65˚ fan tip. Includes 18 in. (45.7 cm) polypropylene wand with 5 in. (12.7 cm) diameter plunger
• output distance - With fan tip: 5-6 ft. (1.5-1.8 m). With drain attachment: N/A
• output volume - With fan tip: 3 gal/min (11.4 l/min). With drain attachment: 2.13 gal/min (8.04 l/min)
• flow rate - With fan tip: 0.5 gal/min (1.9 l/min). With drain attachment: 0.41 gal/min (1.54 l/min)
• pump seals - Viton

  *Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

REQUIRMENTS:

• compressed air requirements - 40 psi (3 bar) with 2-5 cfm (57-142 l/min)
• liquid temperature range - 40-100˚F (4.4-37˚C)
• chemical compatibility - Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.