Product Overview
Features:
- Draws from concentrated product
- Powered by compressed air
- Dilutes at ratios of 14:1 to 320:1
- Holds two FILL-iT chemical jugs or one standard 5 gallon bucket (chemical jugs/bucket not included)
- Onboard water tank – 15 gallon (56.8 liter) capacity
- Hinged back plate provides tool-free access to components
- Quick-change pump
- Hinged lid
- Color coding options:Anti-kink hose protection
- Lid – 7 colors (BK, BL, GN, YL, RD, PL, OR)
- Discharge hose – 4 colors (BL, GN, YL, RD)
- Natural color tank for easy visibility of water levels
- Integrated hose wraps
- Front-facing drain
- In-line strainer to protect pump from debris
Requirements:
COMPRESSED AIR40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
LIQUID TEMPERATURE RANGE40-100ËšF (4.4-37ËšC)CHEMICAL
COMPATIBILITYChemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals.For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
What's in the box?
- Complete foam unit with discharge hose and wand
- Metering tip kit for foam injector
- User manual
- NOTE: Chemical jugs/bucket not included
Specifications:
POWER TYPE | Compressed air |
---|---|
CHEMICAL PICKUP TYPE | Draws from concentrated product |
DILUTION RATIO RANGE* | 14:1 to 320:1 |
NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) | One product |
SUCTION LINE LENGTH/DIAMETER | 8 ft. (2.4 m) clear hose with 1/4 in. (6.4 mm) inside diameter |
CAPACITY | 15 gallons (56.78 liters) of water; Up to 10 gallons (37.85 liters) of concentrate |
DISCHARGE HOSE DIAMETER/LENGTH | 30 ft. (9 m) hose, with 3/4 in. (19 mm) inside diameter |
DISCHARGE WAND/TIP TYPE | 7 in. (17.8 cm) stainless steel wand with zero tip and ball valve |
OUTPUT DISTANCE | 25-30 ft. (7-9 m) |
OUTPUT VOLUME | 20-45 gal/min (75-170 l/min) of foam |
FLOW RATE* | 2 gal/min (7.6 l/min) |
PUMP SEALS | Santoprene, Viton, or Kalrez |
WHEEL TYPE | Two 10 inch non-marking wheels Two 5 inch casters with lock |