Product Overview
A 
product.
product.- Draws from concentrated product
- Powered by compressed air
- Dilutes at ratios of 14:1 to 320:1
- Holds two FILL-iT chemical jugs or one standard 5 gallon bucket (chemical jugs/bucket not included)
- Onboard water tank – 15 gallon (56.8 liter) capacity
- Hinged back plate provides tool-free access to components
- Quick-change pump
- Hinged lid
- Color coding options:
- Lid – 7 colors (BK, BL, GN, YL, RD, PL, OR)
- Discharge hose – 4 colors (BL, GN, YL, RD)
- Anti-kink hose protection
- Natural color tank for easy visibility of water levels
- Integrated hose wraps
- Front-facing drain
- In-line strainer to protect pump from debris
| LIQUID TEMPERATURE RANGE | 40-100ËšF (4.4-37ËšC) |
|---|---|
| ELECTRICAL REQUIREMENTS | 120 VAC at 60 Hz, 2 amps (GFCI protected outlet) for battery charger only |
| OPERATING VOLTAGE | 12 VDC |
| CHEMICAL COMPATIBILITY | Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department. |
| POWER TYPE | Compressed air |
|---|---|
| CHEMICAL PICKUP TYPE | Draws from concentrated product |
| DILUTION RATIO RANGE* | 14:1 to 320:1 |
| NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) | One product |
| SUCTION LINE LENGTH/DIAMETER | 3/8 in. (9.5 mm) inside diameter (water suction) |
| CAPACITY | 15 gallons (56.78 liters) of water; Up to 10 gallons (37.85 liters) of concentrate |
| DISCHARGE HOSE DIAMETER/LENGTH | 30 ft. (9 m) hose, with 3/4 in. (19 mm) inside diameter |
| DISCHARGE WAND/TIP TYPE | 7 in. (17.8 cm) stainless steel wand with zero tip and ball valve |
| OUTPUT DISTANCE | 25-30 ft. (7-9 m) |
| OUTPUT VOLUME | 20-45 gal/min (75-170 l/min) of foam |
| FLOW RATE* | 2 gal/min (7.6 l/min) |
| PUMP SEALS | Santoprene, Viton, or Kalrez |
| TUBING/FITTING SIZES | 1/4 in. (6.35 mm) inside diameter for concentrate suction line |
| WHEEL TYPE | Two 10 inch non-marking wheels, Two 5 inch casters with lock |
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
