Product Overview
A product
- Draws from concentrated product
- Powered by compressed air
- Dilutes at ratios of 14:1 to 320:1
- Holds two FILL-iT chemical jugs or one standard 5 gallon bucket (chemical jugs/bucket not included)
- Onboard water tank – 15 gallon (56.8 liter) capacity
- Hinged back plate provides tool-free access to components
- Quick-change pump
- Hinged lid
- Color coding options:Anti-kink hose protection
- Lid – 7 colors (BK, BL, GN, YL, RD, PL, OR)
- Discharge hose – 4 colors (BL, GN, YL, RD)
- Natural color tank for easy visibility of water levels
- Integrated hose wraps
- Front-facing drain
- In-line strainer to protect pump from debris
COMPRESSED AIR | 40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min) |
---|---|
LIQUID TEMPERATURE RANGE | 40-100ËšF (4.4-37ËšC) |
CHEMICAL COMPATIBILITY | Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department. |
POWER TYPE | Battery |
---|---|
BATTERY CHARGE TIME (FROM FULL DEPLETION) | 7.5 hours |
BATTERY RUN TIME (FROM FULL CHARGE) | Up to 2 hours of non-continuous run time |
CHEMICAL PICKUP TYPE | Draws from pre-mixed solution |
NUMBER OF PRODUCTS UNIT CAN DRAW FROM | One product |
SUCTION LINE LENGTH/DIAMETER | 3/8 in. (9.5 mm) inside diameter |
CAPACITY | 15 gallons (56.78 liters) |
DISCHARGE HOSE DIAMETER/LENGTH | 15 ft. (4.6 m) hose, with 1/2 in. (12.7 mm) inside diameter) |
DISCHARGE WAND/TIP TYPE | Stainless steel wand with 65ï‚° fan tip and ball valve |
OUTPUT DISTANCE | 5-6 ft. (1.52-1.83 m) |
OUTPUT VOLUME | 4-5 gal/min (15-18.93 l/min) of foam |
FLOW RATE* | 2 gal/min (7.6 l/min) |
PUMP SEALS | Santoprene, Viton, or Kalrez |
WHEEL TYPE | Two 10 inch non-marking wheels |
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.