Product Overview
Ideal for misting in areas without compressed air.
This 120 VAC electric unit lets you apply disinfectants and other chemistry with a handheld wand. With a built in air compressor, all you have to do is plug the unit into a standard wall outlet and get to work.
Features:
- Draws from pre-mixed solution
- Powered by electricity (120 VAC)
- Handheld wand with 25 ft. (7.6 m) coiled discharge hose
- See through tank – 15 gallon (56.8 liter) capacity
- Built in air compressor
- Hinged back plate provides tool-free access to components
- Quick-change pump
- Hinged lid
- Color coding options:
- Lid – 7 colors (BK, BL, GN, YL, RD, PL, OR)
- Front-facing drain
- In-line strainer to protect pump from debris
Specifications:
- power type - Electricity
- chemical pickup type - Draws from pre-mixed solution
- number of products unit can draw from (and whether it draws simultaneously or one at a time) - One product
- suction line length/diameter - 3/8 in. (9.5 mm) inside diameter
- capacity - 15 Gallons
- discharge hose diameter/length - 25 ft. (7.6 m) coiled twin-line tubing 1/4 in. (6.4 mm) outside diameter
- discharge wand/tip type - Polypropylene trigger handle with 65° fan tip
- output distance - 1-3 ft. (0.3-0.9 m)
- output volume - 2.1 gal/min (7.9 l/min)
- flow rate* - 0.3 gal/min (1.1 l/min)
- run time from full tank** - Approx. 57 minutes
- wheel type - Two 10 inch (25.4 cm) non-marking wheels, two 5 inch (12.7 cm) casters with lock
- pump seals - Santoprene, Viton, or Kalrez
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
**Area covered and run time may vary based on humidity, air flow, and product used.
Requirements:
- liquid temperature range - 40-100ËšF (4.4-37ËšC)
- electrical requirements - 120 VAC at 60 Hz, 10 amps (CFCI protected outlet)
operating voltage - 120 VAC
- chemical compatibility - Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
