Product Overview
Features:
- Efficient air consumption (12.5 cfm, competing products consume 39 cfm)
- Deactivate unit from a distance
- 3 nozzles mounted on telescoping mist mast
- 20 gallon (75.7 liter) tank
- Hinged back plate
- Natural color tank for easy product level visibility
- Hinged lid – available in 5 colors
- Front-facing drain
- Santoprene, Viton, or Kalrez pump seals available
- In-line strainer
Specifications:
- power type - Compressed air
- chemical pickup type - Draws from pre-mixed solution
- number of products unit can draw from (and whether it draws simultaneously or one at a time) - One product
- capacity - 20 gallons
- flow rate* - 3.7 gallons/hour per nozzle (11.1 gallons/hour total with 3 nozzles)
- pump seals - Santoprene, Viton, or Kalrez
- droplet size - 15 microns at 50 psi (3.4 bar)
- coverage area** - 1 liter of solution will cover approximately 1000 cubic feet
- height - 47 inches (119.3 cm)
- run time from full tank** - Approx. 2 hour
- fog mast height range - 3.5-8.5 ft. (1.1-2.6 m)
- number of nozzles - 3 nozzles
- wheel type - non-marking wheels
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
**Area covered and run time may vary based on humidity, air flow, and product used.
Requirements:
- compressed air - 50 psi (3.4 bar) with 9 cfm (254.9 l/min)
- liquid temperature range - 40-100ËšF (4.4-37ËšC)
- chemical compatibility - Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
