Product Overview
A 
product.
product.- Draws from pre-mixed solution
- Powered by compressed air
- Air operated agitator to continually mix product in tank
- Hinged back plate provides tool-free access to components
- Quick-change pump
- Natural color tank for easy visibility of product levels
- Hinged lid, available in 5 colors
- Integrated hose wraps
- In-line strainer to protect pump from debris
- Front-facing drain
- Fan tip wand assembly for increased coverage
- Anti-kink hose protection
| COMPRESSED AIR REQUIREMENTS | 40-80 psi (3-5 bar) with 15-18 cfm (425-510 l/min) |
|---|---|
| LIQUID TEMPERATURE RANGE | 40-100ËšF (4.4-37ËšC) |
| CHEMICAL COMPATIBILITY | Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or MSDS for your product or contact our customer service department. |
| POWER TYPE | Compressed air |
|---|---|
| CHEMICAL PICKUP TYPE | Draws from pre-mixed solution |
| NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) | One product |
| SUCTION LINE LENGTH/DIAMETER | 3/8 in. (9.5 mm) inside diameter |
| CAPACITY | 30 gallons (113.56 liters) |
| DISCHARGE HOSE DIAMETER/LENGTH | 30 ft. (9 m) hose, with 1/2 in. (12.7 mm) inside diameter |
| DISCHARGE WAND/TIP TYPE | 24 in. (60.9 cm) stainless steel wand with fan tip and ball valve (Fan tips included: ST2520SS, ST1510, ST2508, and ST4008SS) |
| OUTPUT DISTANCE | 6-10 ft. (1.8-3 m) (Varies due to viscosity of product) |
| OUTPUT VOLUME | 0.5-1 gal/min (1.89-3.79 l/min) (Varies due to viscosity of product and fan tip size) |
| FLOW RATE* | 2 gal/min (7.6 l/min) (Varies based on fan tip used) |
| PUMP SEALS | Santoprene, Viton, or Kalrez |
| WHEEL TYPE | Two 10 inch non-marking, two 5 inch casters with lock |
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
