FOAMiT - CENTRAL DOORWAY FOAM STATION - TWIN LINE DISCHARGE

• power type - Central System, Electricity
• chemical pickup type - Pre-mixed solution
• number of products unit can draw from - One product
• flow rate* - 2 gal/min (7.6 l/min)
• time operation type - Repeat Cycle
• coverage area - One nozzle: up to 9×5 ft. (2.7×1.5 m) - Two nozzles: up to 8×4 ft. (2.4×1.2 m) at each nozzle - Three nozzles: up to 6×3 ft. (1.8 x0.9 m) at each nozzle
• Product height - 15 inches (38.1 cm)
• nozzle type - Twin-line stainless steel assembly (GK7T)
• Number of nozzles - One control box can support up to three nozzle assemblies
• distance from nozzles to control box - The combined distance between the control box and the nozzle(s) must equal 100 ft. (30.5 m) or less
• tubing/fitting sizes - Designed for use with 1/2 in. (12.7 mm) outside diameter tubing between control box and nozzle(s)

REQUIREMENTS:

• compressed air requirements - 40-80 psi (3.5 bar) with 5-10 cfm (141-283 l/min)
• liquid temperature range - 40-100°F (4.4-37°C)
• electrical requirements - 120 VAC at 60 Hz, 2 amps (GFCI protected outlet)
• operating voltage - 120 VAC
• central system requirements - Pre-mixed solution must be supplied by a properly sized header system at 2 gpm and 40-80 psi (3-5 bar)
• chemical compatibility - Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.