FOAMiT - DOORWAY FOAM UNIT NOZZLE ASSEMBLY - For single line units

• power type - Compressed air, Electricity
• chemical pickup type - Draws from concentrated product
• dilution ratio range (water:chemical)* - 38:1 to 183:1
• number of products unit can draw from - One product
• suction line length/diameter - 8 ft. (2.4 m) clear hose with 1/4 in. (6.4 mm) inside diameter
• flow rate* - 2 gal/min (7.6 l/min)
• pump seals - Santoprene, Viton, or Kalrez
• time operation type - Repeat Cycle
• coverage area - With one nozzle: 9×4 ft. (2.7×1.5m) - With two nozzles: 5×3 ft. (2.4×1.2m) at each nozzle
• fan tip - ST8070
• nozzle type - Single-line nozzle assembly (GK6T)
• Number of nozzles - One control box can support up to two nozzle assemblies
• distance from nozzles to control box - 25 ft. (7.6 m) max.
• tubing/fitting sizes - Designed for use with 1/2 in. (12.7 mm) outside diameter tubing between control box and nozzle(s)

REQUIREMENTS:

• compressed air requirements - 40-80 psi (3.5 bar) with 5-10 cfm (141-283 l/min)
• water requirements - 10-100 psi (0.69-6.9 bar) - Backflow prevention is required – consult local plumbing ordinances for more information.
• liquid temperature range - 40-100°F (4.4-37°C)
• electrical requirements - 120 VAC at 60 Hz, 2 amps (GFCI protected outlet)
• operating voltage - 120 VAC
• chemical compatibility - Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.