Product Overview
A 
product.
product.- Draws from concentrate
- Water driven
- Dual product injector accurately mixes 2-part products
- Ideal for use with 2-part drain cleaning products
- Safely fill jug, foam unit, spray unit, or equipment tanks
- Mix ratio of 1:1:10 to 1:1:20 (Part A:Part B:Water)
- Mix ratio can easily be changed by adjusting dial gauges
| WATER REQUIREMENTS | 10-100 psi (0.69-6.9 bar) Backflow prevention is required – consult local plumbing ordinances for more information. |
|---|---|
| LIQUID TEMPERATURE RANGE | 40-100ËšF (4.4-37ËšC) |
| CHEMICAL COMPATIBILITY | Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or MSDS for your product or contact our customer service department. |
| CHEMICAL PICKUP TYPE | Draws from concentrated products |
|---|---|
| DILUTION RATIO RANGE (WATER:CHEMICAL)* | 1:1:10 to 1:1:20 (Part A:Part B:Water) |
| NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) | Two products, simultaneously |
| SUCTION LINE LENGTH/DIAMETER | 10 ft. (3 m) clear tubing with 3/8 in. (9.5 mm) outside diameter |
| DISCHARGE HOSE DIAMETER/LENGTH | 10 ft. (3 m) hose, with 3/4 in. (19 mm) inside diameter |
| DISCHARGE WAND/TIP TYPE | 10 in. (50.8 cm) poly wand |
| OUTPUT VOLUME | Varies based on local water pressure |
| FLOW RATE* | Varies based on local water pressure |
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
