Product Overview
A product.
- Designed specifically for use with Sterilex products – part of the Sterilex EZBlend System >>
- Transfer Sterilex from drums to EZBlend Foam Unit without drum pumps
- User-friendly color coding corresponds to Sterilex solution 1 and 2
- Transfer each product at up to 3.5 gal/min (13.2 l/min)
- Viton pump seals for compatibility with Sterilex
- Tool-free pump changes with our quick-change pump bracket
- Chemically-resistant hybrid thermoplastic (TPE) hose
- Weighted suction line with filter and check valve
- Air regulator with filter
- Strain relief on the discharge hose
- Activation by trigger gun
- Air-operated diaphragm pump with quick-release hose barbs
COMPRESSED AIR REQUIREMENTS | 20-80 psi (1.4-5 bar) with 2 cfm (56 l/min) |
---|---|
LIQUID TEMPERATURE RANGE | 40-100ËšF (4.4-37ËšC) |
CHEMICAL COMPATIBILITY | This unit is specifically configured for use with Sterilex liquid products. |
POWER TYPE | Compressed air |
---|---|
CHEMICAL PICKUP TYPE | Draws from concentrated product |
NUMBER OF PRODUCTS UNIT CAN DRAW FROM | One product per pump, individually or simultaneously |
SUCTION LINE LENGTH/DIAMETER | 8 ft. (2.4 m) hose with 1/2 in. (12.7 mm) inside diameter |
DISCHARGE LINE LENGTH/DIAMETER | 8 ft. (2.4 m) hose with 1/2 in. (12.7 mm) inside diameter |
DISCHARGE WAND/TIP TYPE | Polypropylene trigger handle |
FLOW RATE* | 3.5 gal/min (13.2 l/min) per pump |
PUMP SEALS | Viton |
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.