Product Overview
A product.
- Draws from pre-mix solution
- Powered by 120 VAC electricity
- 50 ft. (7.6 m) coiled twin-line tubing for convenient use
- 65 degree fan tip for increased coverage
- On-board compressor
- Compact design
LIQUID TEMPERATURE RANGE | 40-100ËšF (4.4-37ËšC) |
---|---|
ELECTRICAL REQUIREMENTS | 120 VAC at 60 Hz, 10 amps (GFCI protected outlet) |
OPERATING VOLTAGE | 120 VAC |
CHEMICAL COMPATIBILITY | Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or MSDS for your product or contact our customer service department. |
POWER TYPE | Electricity |
---|---|
CHEMICAL PICKUP TYPE | Draws from pre-mixed solution |
NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) | One product |
SUCTION LINE LENGTH/DIAMETER | 6 ft. (1.8 m) hose with 1/4 in. (6.4 mm) inside diameter) |
DISCHARGE HOSE DIAMETER/LENGTH | 50 ft. (7.6 m) coiled twin-line tubing, with 1/4 in. (6.4 mm) outside diameter |
DISCHARGE WAND/TIP TYPE | Polypropylene trigger handle with 65Ëš fan tip |
OUTPUT DISTANCE | 4-6 feet (1.2-1.8 m) |
OUTPUT VOLUME | 6 gal/min (22.7 l/min) of foam |
FLOW RATE* | 1 gal/min (3.8 l/min) |
PUMP SEALS | Santoprene, Viton, or Kalrez |
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.