Product Overview
Ideal for misting in areas without compressed air.
This 120 VAC electric unit lets you apply disinfectants and other chemistry with a handheld wand. With a built in air compressor, all you have to do is plug the unit into a standard wall outlet and get to work.
Features:
- Draws from pre-mixed solution
- Powered by electricity (120 VAC)
- Handheld wand with 50 ft. (7.6 m) coiled discharge hose
- Option for 100 ft. (30.5 m) twin-line or 25 ft. (7.6 m) coiled twin-line discharge tubing
- Built in air compressor (1.5 hp)
- 15 micron droplet size at 50 psi (3.4 bar)
- Compact size for portability
- Santoprene, Viton, or Kalrez pump seals for chemical compatibility
Specifications:
- power type - Electricity
- chemical pickup type - Draws from pre-mixed solution
- number of products unit can draw from (and whether it draws simultaneously or one at a time) - One product
- suction line length/diameter - 6 ft. (1.8 m) clear hose with 1/4 in. (6.4 mm) inside diameter
- discharge hose diameter/length - 100 ft. (15.2 m) twin-line tubing 1/4 in. (6.4 mm) outside diameter
- discharge wand/tip type - Polypropylene trigger handle for liquid output and polypropylene mist nozzle with Kynar tip
- output distance - 3.4.5 ft (0.9-1.4 m)
- output volume - 8.96 oz/min at 50 psi (3.4 bar) – static
- flow rate* -8.96 oz/min at 50 psi (3.4 bar) – static
- pump seals - Santoprene, Viton, or Kalrez
- droplet size - 15 microns at 50 psi (3.4 bar)
- coverage area - 1 liter of solution will cover approximately 1000 cubic feet
- nozzle type - Pneumatic mist nozzle
- number of nozzles - One
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings
Requirements:
- operating air pressure - 50-80 psi (3.4-5.5 bar)
- liquid temperature range - 40-100°F (4.4-37°C)
- chemical compatibility - Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
