Product Overview
A 
product.
product.- Draws from concentrated product
- Dilutes product at ratios of 34:1 to 640:1 or 24:1 to 640:1, depending on fan tip used
- Powered by compressed air
- Quick-change pump
- Poly spray gun wand with fan tip
- Anti-kink hose protection
| COMPRESSED AIR REQUIREMENTS | 40-80 psi (3-5 bar) with 2 cfm (28.3 l/min) |
|---|---|
| WATER REQUIREMENTS | 10-100 psi (0.69-6.9 bar) Backflow prevention is required – consult local plumbing ordinances for more information |
| LIQUID TEMPERATURE RANGE | 40-100ËšF (4.4-37ËšC) |
| CHEMICAL COMPATIBILITY | Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or MSDS for your product or contact our customer service department. |
| POWER TYPE | Compressed air |
|---|---|
| CHEMICAL PICKUP TYPE | Draws from concentrated product |
| DILUTION RATIO RANGE (WATER:CHEMICAL)* | 34:1 to 640:1 with ST2520 fan tip; 24:1 to 640:1 with ST2550 fan tip |
| NUMBER OF PRODUCTS UNIT CAN DRAW FROM | One product |
| SUCTION LINE LENGTH/DIAMETER | 8 ft. (2.4 m) clear hose with 1/4 in. (6.4 mm) inside diameter |
| DISCHARGE HOSE DIAMETER/LENGTH | 100 ft. (9 m) hose, with 1/2 in. (12.7 mm) inside diameter |
| DISCHARGE WAND/TIP TYPE | Polypropylene trigger handle with 25Ëš fan tip |
| OUTPUT DISTANCE | 10-12 ft. (3.0-3.7 m) |
| OUTPUT VOLUME | 2 gal/min (7.6 l/min) of liquid with ST2520 fan tip; 4-5 gal/min (15.1-18.9 gal/min) of liquid with ST2550 fan tip |
| FLOW RATE* | 2 gal/min (7.6 l/min) with ST2520 fan tip; 4-5 gal/min (15.1-18.9 l/min) with ST2550 fan tip |
| PUMP SEALS | Santoprene, Viton, or Kalrez |
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
