Questions? Feedback? powered by Olark live chat software

FOAMiT - WALL MOUNTED SPRAY UNIT-PREMIX-ACID PROOF FITTINGS-SANTO

FoamIt

(No reviews yet) Write a Review
$1,151.06
SKU:
SP-WALL-AP
Weight:
30.00 LBS
Adding to cart… The item has been added

Product Overview

SPRAY-iT product.
  • Draws from pre-mixed solution
  • Powered by compressed air
  • Quick-change pump
  • Poly spray gun wand with fan tip
  • All-poly fluid fittings to increase chemical compatibility
COMPRESSED AIR REQUIREMENTS 40-80 psi (3-5 bar) with 2 cfm (28.3 l/min)
LIQUID TEMPERATURE RANGE 40-100ËšF (4.4-37ËšC)
CHEMICAL COMPATIBILITY Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or MSDS for your product or contact our customer service department.
POWER TYPE Compressed air
CHEMICAL PICKUP TYPE Draws from pre-mixed solution
NUMBER OF PRODUCTS UNIT CAN DRAW FROM One product
SUCTION LINE LENGTH/DIAMETER 8 ft. (2.4 m) hose with 3/8 in. (9.5 mm) inside diameter
DISCHARGE HOSE DIAMETER/LENGTH 50 ft. (9 m) hose, with 3/8 in. (9.5 mm) inside diameter
DISCHARGE WAND/TIP TYPE Polypropylene trigger handle with 25Ëš fan tip
OUTPUT DISTANCE 10-12 ft. (3.0-3.7 m)
OUTPUT VOLUME 2 gal/min (7.6 l/min)
FLOW RATE* 2 gal/min (7.6 l/min)
PUMP SEALS Santoprene, Viton, or Kalrez
FLUID FITTINGS TYPE All-Poly

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

Reviews

(No reviews yet) Write a Review