Questions? Feedback? powered by Olark live chat software
  • HIGH LIMIT SWITCH 1/2 CONDUIT X 3/8MPT 165C/320F 110V 25 AMP

    • HIGH LIMIT SWITCH 1/2 CONDUIT X 3/8MPT 165C/320F 110V 25 AMP

    MSRP: $45.60
    $34.20
    (You save $11.40 )
    (No reviews yet) Write a Review
    SKU:
    4533
    UPC:
    8.712-311.0
    Weight:
    1.00 LBS
    Width:
    2.00 (in)
    Height:
    2.00 (in)
    Depth:
    4.00 (in)
    Adding to cart… category.add_cart_announcement

    Product Description

    HIGH LIMIT SWITCH 1/2 CONDUIT X 3/8MPT 165C/320F 110V 25 AMP

    A High Temperature Limit Switch is used on hot water pressure washers to prevent excessive water temperature. The switch is a bi-metallic, non-adjustable thermostat. When the bi-metallic sensor expands and bends, it breaks an electrical circuit when the water reaches a pre-set temperature. When the switch cools, the metal contracts and the circuit is again completed.

    The sensor consists of two strips of metal bonded together. The strips expand at different rates when the temperature increases. The differing expansion rate of the two metals allows the sensor to bend. Normally the bi-metallic sensor will touch another contact. The control circuit runs through this connection. As the temperature rises, the bi-metallic sensor bends away from the contact and the circuit is broken, cutting power to the fuel solenoid.
    		 
    NOTE: The thermostat will not reset until all areas surrounding the part cool down. This may result in a temperature drop of up to 50 degrees before the thermostat resets and starts the burner.

     

     

    Product Videos

    Custom Field

    Product Reviews

    Write a Review