P219R 4.2GPM 2000PSI 1750RPM 24mm SHAFT (Call for Pricing)

• Maximum Flow: 4.2 GPM
• Maximum Pressure: 2000 PSI
• Maximum Pump Speed: 1750 RPM
• Minimum Horsepower Requirements: 7.2 bhp (9.3 hp for gas engines)
• Shaft Diameter: 24mm
• Plunger Diameter: 18mm
• Stroke: 12.4mm
• Maximum Temperature: 160 Degrees F
• Inlet Ports: Dual 1/2" BSP
• Discharge Ports: Dual 3/8" BSP
• Weight: 12 lbs.

Lubrication: Prior to initial operation, add oil to crankcase so that oil level is between the two lines on the oil dipstick. DO NOT OVERFILL. Crankcase oil should be changed after the first 50 hours of operation, than at regular intervals of 500 hours or less depending on operating conditions.