SPECIFICATIONS:
- Maximum Flow: 3.7 GPM
- Maximum Pressure: 3000 PSI
- Maximum Pump Speed: 1800 RPM
- Minimum Horsepower Requirements: 7.7 bhp (11.5 hp for gas engines)
- Shaft Diameter: 24mm
- Plunger Diameter: 18mm
- Stroke: 10.6mm
- Maximum Temperature: 160 Degrees F
- Inlet Port: Dual 1/2" BSP
- Discharge Port: Dual 3/8" BSP
- Weight: 16 lbs.
Lubrication: prior to initial operation, add oil to the crankcase so that oil level is between the two lines on the oil dipstick. DO NOT OVERFILL. Crankcase oil should be change after the first 50 hours of operation, then at regular intervals of 500 hours or less depending on operating conditions.
|
