P56W 6.1GPM 1900PSI 1420RPM 24mm SHAFT

SPECIFICATIONS:

• Maximum Flow: 6.1 GPM
• Discharge Pressure: 2320 PSI
• Maximum Pump Speed: 1420 RPM
• Minimum Horsepower Requirements: 9.7 bhp (12.6 hp for gas engines)
• Shaft Diameter: 22mm
• Plunger Diameter: 20mm
• Stroke: 18.1mm
• Maximum Temperature: 160 Degrees F
• Inlet Ports: Dual 1/2" BSP
• Discharge Ports: Dual 3/8" BSP
• Weight: 18 lbs

Lubrication: Prior to initial operation, add oil to crankcase so that oil level is between two lines on the oil dipstick. DO NOT OVERFILL. Crankcase oil should be changed after the first 50 hours of operation, then in regular intervals of 500 hours or less depending on operating conditions.