Product Overview
stop using harsh solvents, and get a greener clean.
Our heated parts washer works with aqueous (water-based) chemistry, so it’s easier on your parts, your hands, and the planet.
- Heats solution to 105 °F (40.6 °C) for better cleaning performance
- Choose your chemistry – works with most aqueous (water-based) cleaning & degreasing products
- Separate heater & flow controls help you save energy during off hours
- Counter-height work surface – 36 in. (91.4 cm)
- 18 x 30 in. (45.7 x 76.2 cm) sink interior
- Weight capacity – up to 400 lbs. (181.4 kg)
- Adjustable output –
- Flow-through brush and flexible rinse line – use simultaneously or separately
- Rinse line flow control valve – adjust the flow rate as you work
- Sink drain grate to catch small parts
- Top-access 250 micron filter
- Lid with hold-open support – limits evaporation, but stays out of your way
- Fluid capacity – 20 gallons (75.7 liters)
- Durable construction
- Designed for serviceability
- Modular design – easily separate base, sink, and control modules
- Sloped interior base to collect sediment away from pump intake
- Round interior corners for easy reservoir cleaning
SPECIFICATIONS
- power type - Electricity
- chemical pickup type - Draws from pre-mixed solution
- number of products unit can draw from - One product
- fluid capacity - 20 gallons (75.7 liters)
- output lines - FLOW-THROUGH BRUSH:3 ft. (0.9 m) hose with 1/4 in. (6.4 mm) inside diameter and flow-through brush; FLEXIBLE RINSE LINE: 2 ft. (0.6 m) modular hose with 1/2 in. (12.7 mm) inside diameter and 1/2 in. (12.7 mm) round nozzle
- flow rate - 150 gal/hour (567.8 l/hour)
- pump seals - Viton
- heated operating temperature - 105 ËšF (40.6 ËšC)
- filter bag - 250 micron rating, size 4
- weight capacity - Up to 400 lbs. (181.4 kg)
- overall exterior dimensions - 33 x 25 x 65 in. (83.8 x 63.5 x 165.1 cm) with lid open
- sink interior dimensions - 30 x 18 x 5 in. (76.2 x 45.7 x 12.7 cm)
- work surface height - 36 in. (91.4 cm)
- foot type - Four adjustable leveling feet
REQUIREMENTS
- incoming liquid temperature range - 40-110 ËšF (4.4-43.3 ËšC) (NOTE: Heated operating temperature is 105 ËšF (40.6 ËšC)
- electrical requirements - 120 VAC at 60 Hz, 20A
- operating voltage - 120 VAC
- chemical compatibility - for use with aqueous solutions only. Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
