Parts And Accessories

FOAMit DS5-CB, Pre-Mix Doorway Foam Unit-SANTOPRENE

  A  product. Draws from pre-mixed solution Powered by compressed air and electricity Repeat cycle timer Quick-change pump Supports up to 3 twin-line stainless steel nozzle assemblies Up to 100 ft. (30.5 m) total distance...

FOAMiT DS1, DOORWAY FOAM UNIT - PREMIX - SANTOPRENE

  A  product. Draws from pre-mixed solution Powered by compressed air and electricity Repeat cycle timer Quick-change pump Supports up to 2 single-line nozzle assemblies Up to 25 ft. (7.6 m) total distance between control box and...

1/2IN NPT AND 1/4IN FNPT WAND - BLACK UHMW - 12" LONG

1/2IN NPT AND 1/4IN FNPT WAND - BLACK UHMW - 12IN LONG

PSGORV O-Ring for PSG12

PSGORV O-Ring for PSG12

SPRAY TIP-65 DEGREE-1.5 GPM-STAINLESS-1/4 MPT

SPRAY TIP-65 DEGREE-1.5 GPM-STAINLESS-1/4 MPT

1/2IN NPT AND 1/4IN FNPT WAND - BLACK UHMW - 4IN LONG

1/2IN NPT AND 1/4IN FNPT WAND - BLACK UHMW - 4IN LONG

FOAM-iT, 5 Liter Tank - Replacement Tank for 1.3 Gal Units

Replacement Tank for 1.3 Gal Unit

FOAMiT - Stainless Wand Assembly for 1in. Hose - 10" SS Wand - 3/4 in SS Ball valve

SPECIFICATIONS: Stainless steel wand assembly with zero tip for foam units with 1 inch hose 10 in. stainless steel wand with zero tip 3/4 in. stainless steel ball valve INCLUDED: Complete Wand Assembly with Clamp

FOAMiT - WALL MOUNTED FOAM UNIT-CONCENTRATE- KALREZ

A  product. Draws from concentrated product Dilutes at ratios of 14:1 to 320:1 Powered by compressed air Stainless steel ball valve and wand Stainless steel fluid fittings Quick-change pump COMPRESSED AIR REQUIREMENTS 40-80 psi...

FOAMiT - Stainless Wand Assembly for 3/4 in. Hose - 10" SS Wand - 1/2" SS Ball Valve

SPECIFICATIONS: Stainless steel wand assembly with zero tip for foam units with 3/4 inch hose 10 in. (17.8 cm) stainless steel wand with zero tip 1/2 in. stainless steel ball valve with oval handle 3/4 in. bard for 3/4 in. (19 mm) inside diameter...

FOAMiT - SS Wand Assembly for 1 in. Hose - 3/4 in Ball Valve

SPECIFICATIONS: Stainless steel wand assembly with zero tip for foam units with 1 inch hose 7 in. (17.8 cm) stainless steel wand with zero tip 3/4 in. stainless steel ball valve INCLUDED: Complete Wand Assembly with Clamp   *image may...

FOAMiT - Stainless Wand Assembly for 1/2in. Hose - 10" SS Wand - SS Ball Valve

SPECIFICATIONS: Stainless steel wand assembly with zero tip for foam units with 1/2 inch hose 10 in.  stainless steel wand with zero tip 1/2 in. stainless steel ball valve with oval handle 1/2 in. bard for 1/2 in. (12.7 mm) inside diameter...