Parts And Accessories

FOAMiT - WALL MOUNTED SPRAY UNIT-HIGH CONCENTRATE-UP TO 1:1 DILUTION-ALL POLY FITTINGS-SANTO (CONTROL BOX ONLY)

(CONTROL BOX ONLY)   A  product. Draws from concentrated product Dilutes product at ratios of 34:1 to 640:1 or 24:1 to 640:1, depending on fan tip used Powered by compressed air Quick-change pump Poly spray gun wand with fan...

FOAMiT - Lock-It 2x1 Gallon Lockable Rack

Features Secure standard 1-gallon jugs Wall mounted Holds two 1-gallon containers with diameters up to 6 in. (15.2 cm) Can be locked down (requires 1/4 in. padlock, not included) Cutouts for label visibility Holes to attach chemical...

FOAMiT - DOORWAY FOAM NOZZLE ASSEMBLY - TWIN LINE - ST80200 FAN TIP

A  product.   FEATURES: Stainless steel nozzle assembly that pairs with GK5T, DS5 or DS4 Can connect up to 3 nozzles Cannot connect additional nozzles after assembly SPECIFICATIONS: power type - Compressed air,...

FOAMiT - DOORWAY FOAM UNIT NOZZLE ASSEMBLY - For single line units

A  product.   FEATURES: Polypropylene and stainless steel nozzle assembly that pairs with GK2T, DS1 or DS3 - Recommend one nozzle only SPECIFICATIONS: power type - Compressed air, Electricity chemical pickup type...

FOAMiT - WALL MOUNTED FOAM UNIT-CONCENTRATE- KALREZ (CONTROL BOX ONLY)

(CONTROL BOX ONLY)   A  product. Draws from concentrated product Dilutes at ratios of 14:1 to 320:1 Powered by compressed air Stainless steel ball valve and wand Stainless steel fluid fittings Quick-change pump COMPRESSED...

FOAMiT - WALL MOUNTED FOAM UNIT-PREMIX- VITON (CONTROL BOX ONLY)

(CONTROL BOX ONLY)   A  product. Draws from pre-mixed solution Powered by compressed air Stainless steel ball valve and wand Stainless steel fluid fittings Quick-change pump COMPRESSED AIR REQUIREMENTS 40-80 psi (3-5 bar)...

FOAMiT - WALL MOUNTED FOAM UNIT-PREMIX-ALL POLY FITTINGS- VITON (CONTROL BOX ONLY)

(CONTROL BOX ONLY)   A  product. Draws from pre-mixed solution Powered by compressed air Stainless steel ball valve and wand Stainless steel fluid fittings Quick-change pump COMPRESSED AIR REQUIREMENTS 40-80 psi (3-5 bar)...

FOAMiT - CENTRAL DUAL FOAM STATION (CONTROL BOX ONLY)

(CONTROL BOX ONLY)   A  product.   FEATURES:  Drop station for central foam system - Pump and nozzles sold separately Two foam systems built inside a shared enclosure – systems must run...

FOAMiT - PORTABLE COMPRESSOR FOAM UNIT- TWIN LINE - VITON (CONTROL BOX ONLY)

(CONTROL BOX ONLY)   A  product. Draws from pre-mix solution Powered by 120 VAC electricity 25 ft. (7.6 m) coiled twin-line tubing for convenient use 65 degree fan tip for increased coverage On-board compressor Compact...

FOAMiT - PORTABLE COMPRESSOR FOAM UNIT- TWIN LINE (CONTROL BOX ONLY)

(CONTROL BOX ONLY)   A  product. Draws from pre-mix solution Powered by 120 VAC electricity 25 ft. (7.6 m) coiled twin-line tubing for convenient use 65 degree fan tip for increased coverage On-board compressor Compact...

FOAMit DS5-CB, Pre-Mix Doorway Foam Unit-SANTO (CONTROL BOX ONLY)

(CONTROL BOX ONLY)   A  product. Draws from pre-mixed solution Powered by compressed air and electricity Repeat cycle timer Quick-change pump Supports up to 3 twin-line stainless steel nozzle assemblies Up to 100 ft. (30.5 m)...

FOAMiT DS4V-CB, DOORWAY FOAM UNIT-CONCENTRATE -VITON (CONTROL BOX ONLY)

(CONTROL BOX ONLY)   A  product. Draws from concentrated product Dilutes product at ratios of 38:1 to 183:1 (water:chemical) Repeat cycle timer Quick-change pump Supports up to 3 twin-line stainless steel nozzle assemblies Up to...